Downstream

Threaded Moisture / Water Separators

threaded-moisture-separator

For compressed air installations where water contamination is a real problem, the Walker Filtration range of water separators offer an effective solution. Typically, water separators are installed downstream of after coolers and air receivers, refrigerant dryers and at strategic points in pipe work installations. Specially designed, Walker Filtration’s water separators utilize an internal spinner which removes large quantities of condensate by centrifugal action. Water separators are available for operating pressures up to 16 bar (232 psig).

Download Brochure: Water-Separators-Brochure


Pressure Vessels & Air Receivers

Vertical Air Receivers

OUR 10 – 5,000 GALLON VERTICAL AIR RECEIVERS contain the following features:

  • photo_verticalairreceiverDesigned and constructed in accordance with ASME Section VIII Div-I Code for compressed air storage use.
  • “U” stamped and registered with the National Board of Pressure Vessel Inspectors.
  • Most designs include Canadian Registration Numbers (CRN).
  • Capable of building to American Bureau of Shipping (ABS) and United States Coast Guard (USCG) codes.
  • Custom engineered designs available upon request.
  • Exterior surface painted with one coat standard shop primer.
  • Special exterior and interior coatings available upon request.

Horizontal Air Receivers

OUR 10 – 2,260 GALLON HORIZONTAL AIR RECEIVERS contain the following features:

  • photo_horizontalairreceiverDesigned and constructed in accordance with ASME Section VIII Div-I Code for compressed air storage use.
  • “U” stamped and registered with the National Board of Pressure Vessel Inspectors.
  • Most designs include Canadian Registration Numbers (CRN).
  • Capable of building to American Bureau of Shipping (ABS) and United States Coast Guard (USCG) codes.
  • Custom engineered designs available upon request.
  • Exterior surface painted with one coat standard shop primer.
  • Special exterior and interior coatings available upon request.

Owamat Gravity Oil/Water Separators

BEKO has been producing the ÖWAMAT® series oil/water separators for more than two decades. Having been consistently upgraded and improved over time, this generation now available, in particular, has become the standard of the industrial sector, and are products which have often been copied but never equaled.

ÖWAMAT® separators are known for their superior cost-effectiveness and function:

  • owamat-gravity-oil-water-separatorApplication specific sizes
  • No energy costs
  • National technical approval for all sizes
  • Treated wastewater requires no special discharge permits
  • Low maintenance, only one weekly control is needed
  • Economic payback within a few months
  • Up to 25% greater capacity according to unit type

Download Brochure: Owamat-Oil-Water-Separator-Brochure


Drains

Bekomat No-Air-Loss Drains / Bekomat High Pressure Drains

BEKOMAT® drains have become the industrial standard because of its high reliability and particularly because it offers energy-saving payback operation without loss of compressed air. There are a number of very good technical reasons for this:

bekomat-specialty-drainsCompared with float drains, BEKOMAT® has decisive advantages, especially since it:

  • functions unaffected by dirt, resulting in reliable operation
  • is equipped with an alarm signal
  • requires very little maintenance
  • has large cross-sections to prevent emulsification

BEKOMAT® also has decisive advantages over solenoid valves, especially since it:

  • operated in accordance with the actual condensate quantity
  • avoids unnecessary loss of compressed air
  • is equipped with a fault signal
  • has large cross-section value to prevent emulsification

Download Brochure: Bekomat Drains